We are taking Hydro Force Nozzle orders again. Currently there is a 2 to 3 week shipping backlog on new orders. We are shipping nozzles in the order they are received, so please be patient.

Due to material cost increases we have had to raise prices for 2018. The quick connectors are no longer included, but they are available as an extra option ($20 extra). The pressure tube will come with standard male pipe threads on it. The current nozzle prices are listed below, however it may be necessary to make another price adjustment in the near future due to increases in steel tubing costs.

Prices do not include shipping.
HF150 - $235
HF200 - $265
HF250 - $285
HF300 - $320
HF400 - $370

Optional quick connector set (shown) is an additional $20
*$235.00 +s/h
The Hydro-Force™ 250  can be used with almost any 2.5” dredge or highbanker, or it can be powered by an inexpensive trash pump. It only requires a single pressure hose, just like a conventional suction nozzle. Pressure tube thread sizes available are 1.5” or 1.25.”  The durable stainless steel nozzle tip is coned down  to maximize suction and dramatically reduce plug-ups.  In dry material, the unique 360 degree high pressure ring forces gravel and gold inward and upward into the suction stream.  

*Price does not include quick connector set pictured. The 1.25” pressure fitting is not recommended unless you have a high pressure dredge pump designed to power a 2.5” nozzle.
Hoses, motor/pump and sluice are not included. A water source is required for your water pump. (5,400 GPH  @ 40psi water pump or dredge pump required). Not intended for use with lay flat hose.
$285.00 +s/h
HYDRO-FORCE™ 300 DRY LAND SUCTION NOZZLE
You’ve asked for it, now it’s here, the Hydro-Force™ 300! The HF300 is for use with a 3” suction hose for awesome Dry Land Suction Power. Pressure tube thread sizes available are 1.5” or 2” Just like it’s predecessor, the stainless steel tip on the HF300 is coned down for maximum suction and minimum plug-ups.

*Price does not include quick connector set pictured. The optional 1.5” pressure fitting is not recommended unless you have a high pressure dredge pump designed to power a 3” nozzle.
Hoses, motor/pump and sluice are not included. A water source is required for your water pump. (8,000 GPH  @ 40 psi water pump or a dredge pump required). Not intended for use with lay flat hose.

The HF 300 is a real work horse, it can chew through gravel at a phenomenal rate. It is a powerful tool for dry land gold recovery.
*$320.00 +s/h
Picture(JPG).jpg
Picture(JPG)-<wbr>5.jpg
Hydro-Force™ Dry Land Suction Nozzles
International buyers (except Canada) please contact me for shipping cost before making a purchase. Admin@midwestprospector.com
HF250 - May take up to 3 weeks to ship (depending on current order volume).
pressure fitting options
*$265.00 +s/h
Picture(JPG)-<wbr>6.jpg
HF200 - May take up to 3 weeks to ship (depending on current order volume).
HYDRO-FORCE™ 200 DRY LAND SUCTION NOZZLE
Hydro-Force™ 200! The little HF200 uses a 2” suction hose and a 1.5” or  1.25” thread size for your pressure hose fitting for awesome Dry Land Suction Power. Just like the bigger units, the stainless steel tip on the HF200 is coned down for maximum suction and minimum plug-ups.

*Price does not include quick connector set pictured. Hoses, motor/pump and sluice are not included. A water source is required for your water pump
(3,600 GPH  @ 40 psi water pump or dredge pump required) Not intended for use with lay flat hose.

The HF 200 is light weight and easy to use, it can get into tight spots and just like the larger units, it has awesome dry land suction power!

HF300 - May take up to 3 weeks to ship (depending on current order volume).
pressure fitting options
*$370.00 +s/h
HF400 - May take up to 3 weeks to ship (depending on current order volume).
HYDRO-FORCE™ 400 DRY LAND SUCTION NOZZLE
Here by popular demand is the HF400. This unit uses a 4 inch suction hose and a 2 inch pressure hose, comes with a 2” male pipe thread. This is the top of the line and a true work horse. The HF400 is an awesome dry land “production machine” and can move a mound of material in very short order!

*Price does not include quick connector set pictured. Hoses, motor/pump and sluice are not included. A water source is required for your water pump .
(11,000 GPH @ 40 psi water pump or a dredge pump required). Not intended for use with lay flat hose.
Picture(JPG)-<wbr>7.jpg
HYDRO-FORCE™ 150 DRY LAND SUCTION NOZZLE
You’ve asked for it, now it’s here, the Hydro-Force™ 150! The little HF150 uses a 1.5” suction hose and a 1” or 1.25” pressure hose (your choice or thread size) for awesome Dry Land Suction Power. Just like the bigger units, the stainless steel tip on the HF150 is coned down for maximum suction and minimum plug-ups.  Ideal size for rooting gold out of crevices!

*Price does not include quick connector set pictured.  Hoses, motor/pump and sluice are not included. A water source is required for your water pump
(1900 GPH  @ 40 psi water pump or dredge pump required) Not intended for use with lay flat hose.
The HF 150 is light weight and easy to use, it can get into tight spots and just like the larger units, it has awesome dry land suction power!

HF150 - May take up to 7 days to ship (depending on current order volume).
Picture(JPG)-<wbr>8.jpg
pressure fitting options
pressure fitting options
pressure fitting options
International buyers (except Canada) please contact me for shipping cost before making a purchase. Admin@midwestprospector.com
International buyers (except Canada) please contact me for shipping cost before making a purchase. Admin@midwestprospector.com
International buyers (except Canada) please contact me for shipping cost before making a purchase. Admin@midwestprospector.com
International buyers (except Canada) please contact me for shipping cost before making a purchase. Admin@midwestprospector.com
Select pressure fitting size and quick connector (qc) options using drop down menu below.
Select pressure fitting size and quick connector (qc) options using drop down menu below.
HYDRO-FORCE™ 250 DRY LAND SUCTION NOZZLE
Select pressure fitting size and quick connector (qc) options using drop down menu below.
Select pressure fitting size and quick connector (qc) options using drop down menu below.
Select quick connector (qc) options using drop down menu below.
pp1f0d21eb.jpg
MIDWEST PROSPECTOR STORE
**PLEASE EXCUSE THE BROKEN PICTURE LINKS, THE SITE IS STILL UNDER CONSTRUCTION**